2. Procedures for Changing the FlexModule Mini on the B20X

Step 1: Power off the router. The router MUST be disconnected from power before starting the upgrade.

Step 2: Disconnect all antennas.

Step 3: Loosen the screws on the cover or the installed FlexModule Mini.

Step 4: Remove the cover or module by pulling it out directly.

Step 5: Install the new module. Make sure it is correctly aligned before pressing the module

firmly into place. The FlexModule Mini should sit flush with the router chassis.

Step 6: Tighten the screws until the FlexModule Mini sits flush and tight with the collar.

Step 7: Reconnect the antennas.

Step 8: Reconnect the power.